AEROPAC S.A.

Aeropac

Our Company

Aeropac S.A. started its aerospace activities in 1986 with a missile program. This committed Aeropac to apply the strict regulations that this type of activities demand.

For a period of time the company concentrated on design and constructionof components for missile structures, entire stages, research mock-ups, transport dollies, hoisting devices and transport containers for the aforementioned components Aeropac manufactured major jigsto assemble the CBA-123's Embraer/Fama commuter aircraft), fuselage subassemblies as well as
many other jigs and fixtures.

Another type of activity is the milling of aerospace parts, this also derived from the missile program for which Aeropac was one of the main suppliers of structural components.

After the completion of the missile program, the company has been supplying aircraft parts for the jet trainer IA-63 and the commuter aircraft CBA-123.

In order to keep pace with today's aircraft manufacturing industry, Aeropac is aiming to enter into the field of composite material parts, for that purpose is planning to build a new plant to meet the challenge this new activity demands.

Present Aeropac's facilities have been inspected and approved by the following customers; Embraer, FAMA, LTV, Ayres Corp, etc.

Aeropac's new facilities will be 44,500 sq. ft., with further expansion to a total of approximately 250,000 sq. ft. Expansion to be made as required.

Aeropac

GUATANTEE OF QUALITY

In AEROPAC the quality is a fundamental compound.
Raw materials, manufactured pieces and final products have an strict quality control.

In order to get the most excellent products in the market, AEROPAC has important equipments and speciallized technical staff.

lts activity is carried out by an interesting program which so many procedures, analysis and research are included to verify the design and the process of the material. 

Aeropac

PRODUCTION

AEROPAC accomplishes its works helped with a complex varieties of machines and a great metallurgic structuve equiped with sophisticated technical elements, therefore the acquisiition of new machines and equjpment is a constant process in our company.

That’s the reason why the people together with the machines have served to carry out important works of technical requirements. 

Aeropac

DESIGN

AEROPAC design and manufacturation high technological elements appointed from the beguinng most of them to the aeronautical and spatian fields also allowing covered, with our high capacity, the areas of nuclear, automotive, food, railroad, oil, sirderurgical and naval industry and of course all kind of parts where metalmechanical

Client List

The main customers to whom Aeropac S.A. has supplied aerospace component are

- Embraer, Brazil
- FAMA, Argentina
- FAMA/Dornier, Germany
- Glasser Dirks, Germany
- IIAE/MBB, Germany
- Fuerza Aérea Argentina, Argentina
- Aero Boero, Argentina
- American Champion (Bellanca),USA
- Steen Aero Lab (Pitts), USA
- Superior, USA
- Ayres Corp., USA 
- Laviasa SA, (Piper Pawnee), Argentina
- Cicaré Helicópteros, Argentina
- Dedienne Corporation, USA
- Dedienne Aerospace, France
- Kevin Kimball, USA
- Wics, USA
- Volar Helicopters, USA
- Aerostruktur, Germany
- Diamond, Canada
- Johnson, USA
- Lycomming, USA

This equipment is built, sold and serviced by Aeropac Division, headquartered in Mendoza Argentina filling equipment can be found in many plants like

- DISA San Juan Qty. 2 Argentina (Concentrated Grape)
- Gancia Mendoza Argentina (Concentrated Grape)
- Madcur San Juan Argentina (Concentrated Grape)
- Dulcor Mendoza Qty.2 Argentina (Concentrated Fruit Pulp and Tomato)
- EOV Marchigue Qty. 2 Chile (Concentrated Grape)
- San Miguel Tucuman Argentina (Concentrated Lemon Citrus)
- Tecnovin Brasil (Concentrated Grape)
- Aloe Vera Jaumave Mexico (Concentrate Aloe Vera)
- Viñas Argentinas Mza Argentina (Concentrate Grape)
- Jucosol Chile (Concentrate Grape)
- ENAV San Juan Argentina (Concentrate Grape)
- Cordon del Plata Mendoza Argentina (Concentrate Grape)

Aeronautical Division

Aeropac S.A. started its aerospace activities in 1986 with a missile program. This committed Aeropac to apply the strict regulations that this type of activities demand.
For a period of time the company concentrated on design and construction of components for missile structures, entire stages, research mock-ups, transport dollies, hoisting devices and transport containers for the aforementioned components Aeropac manufactured major jigsto assemble the CBA-123's Embraer/Fama commuter aircraft), fuselage subassemblies as well as many other jigs and fixtures.
Another type of activity is the milling of aerospace parts, this also derived from t

  • STANDART PRODUCTS Tailwheel, Torqueplates, Throttle Quadrants
  • DESIGN-Containers used for transport by air and surface. Several hoisting devices for handling of components.
    • Training and development mock-ups.
    • Integration and transport dollies.
    • Missiles principal structures.
    • Design of motor lifting dolly for Mirage III.
    • Douglas A-4 droppable fuel tanks.
    • Several machining fixtures for IA-63 aircraft. 
    • Milling fixture for machining fin spars of Embraer-Fama CBA-123 program.
    • Several fixtures for IA-58 Pucara plane.
    • Jigs and major jigs for the IA-63 and CBA-123 fuselages.
    • Molds and templates for sheet metal aircraft parts.
  • JIGS - For Embraer-FAMA CBA-123 Program and For AYRES Corp. :
  • SUBASAMBLIES PARTS-
    · Milling of many FAMA IA-63 aircraft parts.  · Milling of many Embraer EMB-120 aircraft   parts.   · Milling of Embraer-Fama CBA-123 aircraft  parts.   · Main Landing gear of Bellanca and Aero Boero aircraft.   · Milling of missile Condor II parts (Included Liquid Motor).   · Sub-assemblies (Riveted & Welded).
  • AIRPLANE STRUCTURES-  · Fuselages for Pitts Specials for Steen Aero Lab, USA
      · Fuselages, Landing Gears, Tail Surfaces, Engine Mounts for Piper Pawnee. Laviasa Argentina  
      · Landing Gears for Glasser Dirks, Germany
  • GROUD SUPPORT EQUIPMENT - Boeing and Airbus maintenance    · Dedienne Aeropace France   · Dedienne Miami  · Hanil Aero South Korea 
  • SPRING LANDING GEARS   · Tailspring Rudder  · Position Light  · Torque Plate
  • HAIL STORM PREVENT SYSTEM  
     · Rocket launchers.  · Rockets.  · Electronic Panel for radar.  · Technological development.
  • HELICOPTERS PARTS - Volar Helicopters, Miami, Florida USA
    Cicare Helicopteros Saladillo, Argentina
    Main & Tail Gear box, CNC parts, Controls, Engine Mounts, Padals, etc.
  • QUALITY CONTROL ASSURANCE - Due to the nature of its activities, Aeropac has a Quality Assurance Department that regulates its output in accordance to:

    · DNA SPECS. · FAA SPECS.· MIL-Q-9858 A· MIL-I-45208 A· MIL-STD-45662· EMBRAER SPECS· FAMA SPECS · PIPER SPECS· CICARE SPECS· AEROBOERO SPECS.· AYRES SPECS.· PITTS SPECS.

    It is important to point out that a bilateral agreement was signed in 1989 between the us federal aviation administration and the argentine dirección nacional de aeronavegabilidad.

  • ENGINE PARTS FOR  Superior , USA :
    + Head Cylinder for Lycoming & Continental Engines  
    + Crankcase for Lycoming & Continental Engines
    + Pistons / Camshaft / Starter Gear Ring

INDUSTRIE

EXCELLENT TECHNOLOGICAL LEVEL OF DESIGN AND MANUFACTURE
LOW OPERATING COSTS (WORKMANSHIP AND ENGINEERING)
QUALITY ASSURANCE ACCORDING TO INTERNATIONAL STANDARDS
PROVEN EXPERIENCE

Líneas de piping para Y.P.F. (Destilería La Plata)
Internos del reactor generador
Hornos de proceso destilería lujan de cuyo-proyecto mayor conversión
Análisis de estructuras reticuladas
Esfera de etano petroquímica Bahia Blanca
Sistema clasificación carbones residuales, carbo metal
Planta desgasificadora, carbo metal
Reductores a ruedas cilíndricas helicoidales
Planta Isomax

Puentes grúa planta Someca
Banco de celdas de flotación y filtro de vacío, planta YMAD
Mecanismo de izaje y almacenamiento de ataguías, dique Ullum
Reductores de izaje y traslación para pórticos y puentes grúas
Mecanismos de cierre de compuertas , carbometal
Trituradora de carbones, stein
Válvulas dosificadoras de crudos, Cartellone.
Planta llave en mano refinería de nafta - Astra Evangelista
Equipos de procesos y de tecnología ambiental- torre lavadora de humos-cepas
Argentina

Plantas llave en mano
Repuestos para sistemas de exploración y perforación
Mantenimiento
Estructuras metálicas y mecanizados
Recipientes de presión
Líneas de piping
Tanques para almacenamiento de líquidos
Intercambiadores de calor
Estructuras metálicas:
Montajes electromecánicos
Montajes metalúrgicos
Instalaciones industriales:
Instalaciones eléctricas:

Automatización y control
Sistemas de condensación y evaporación
Sistemas de deshidratación
Autoclaves
Equipos de izaje y movimiento
Montaje

Ingeniería cálculo, diseño de fabricación

CLIENTE: INVAP SE
Rediseño y fabricación maquina de disparo para el reactor nuclear de Australia

Recintos Estancos Celdas Mo 1, 2 Y 3- Reactor de Egipto

Diseño Y Fabricación Estructuras Soportes Y Cajas De Movimientos Teradi-800.

Fabricación de Accionamientos para Telemanipulador Incluyendo los Pasamuros

Herramientas (tools) de operación – Australia
Piezas varias reactor de Australia

DISPOSITIVOS Y UTILAJES DE ENSAMBLE

Dispositivo para perforado de valvulas
Dispositivo utilaje para ensamblado "lateral izquierdo",con puerta deslizante.
Avion cba 123 dispositivo utilaje para ensamblado de piso avion cba 123
Dispositivo utilaje "lateral derecho" avion cba 123
Dispositivo utilaje armado avion cba 123.-dispositivo utilaje armado estabilizador.
Avion cba 123
Dispositivo para mecanizado de largeros avion cba 123
Dispositivo para mecanizado de largeros avion ia 63 pampa.
Dispositivo para control angulo de deflexion de timon
Mascaras de perforado

PIEZAS MECANIZADAS POR CNC
Guiñoles de comando para avion cba 123- pedalera
De comando avion cba 123- reguladores de
Cinematica- tomas pilon de ala avion pampa ia 63-
Tomas anterior y posterior avion ia 63 pampapernos
De piston para compresores- tapas tren de
Aterrizaje

MATRICERIA:
Matriz de forja para trenes de aterrizaje avion
Bellanca
Matriz de punzonado

FABRICACION DE TABLEROS DE MAZOS DE CABLES INCLUYENDO CONTRAPARTES
Fabricacion de contrapartes de
Conectores en banco
Equipos de testeo para mazos de cables
Bancos de ensayos de elementos
Tableros

Elevadores de cangilones
Transporte funicular
Camara de humos para horno rotativo
Molinos a martillo fk 90x20 (clinker)
Valvulas dosificadoras de crudos
Tolvas de alimentacion
Gruas porticos cap. 5 ton.
Camisas para bombas fuller
Roscas transportadoras
Estructuras metalicas en general
Piezas y equipos mecanizados
Valvulas exclusas
Engranajes de diversos tipos y diametros
Cintas transportadoras
Hornos de proceso

Automatizacion y control
Sistemas de condensacion y evaporacion
Sistemas de deshidratacion
Autoclaves
Equipos de izaje y movimiento
Montaje 

Aeropac
Aeropac
Aeropac

Entre Rios 73
Salon Primero, Primer Piso
(5500) Mendoza, Argentina

Contacts

Email: [email protected]
Phone: +54 9 261 536 2607